Balloon Gloss User Manual
Wesly VenablesBalloon Gloss, let it shine for longer!
Balloon Gloss protects air and helium filled latex balloons against the dulling effect of oxidation.
Instructions:
1. Place a drop sheet in the work area to prevent stained surfaces and slippery floors.
2. Balloon Gloss can be paired with Balloon Oomf treated balloons. The Balloon Oomf must first be allowed to dry up to 5 hours before applying Balloon Gloss, to not reduce float times.
3. Spray a fine mist all over the surface of the balloons, but not so much that it starts to drip.
4. Although it is not necessary to spread the Balloon Gloss, it can be spread by rubbing the balloon, if desired.
5. Balloon Gloss treated balloons will have a slight oily feeling to the touch.
500ml Balloon Gloss covers up to 420 - 11" balloons, depending on the amount applied per balloon.
Although it is non-toxic, for added safety, it is recommended to wear glasses or safety goggles when applying Balloon Gloss to avoid eye contact. If Balloon Gloss contacts the eye, flush with water several times. If irritation persists, consult a physician. Do not drink and keep out of reach of children.
